Day: September 21, 2020

102-54-5, Ferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,102-54-5

Under a nitrogen atmosphere, ferrocene (10 g, 53.8 mmol) was dissolved in anhydrous n-hexane (50 ml), followed by adding and mixing with tetramethylethylenediamine (TMEDA, 18.1 ml, 84.5 mmol) A solution of n-butyllithium (n-BuLi) in n-hexane (2.5 M, 48.0 ml) was added slowly dropwise at 0 C., followed by stirring at 25 C. After stirring for 12 hours and removing the solvent, a light orange yellow complex was formed. The complex was added to anhydrous ethyl ether (200 ml), followed by stirring to disperse the complex in anhydrous ethyl ether and lowering the temperature of the dispersion to -78 C. A solution of iodine (19.0 g) in ethyl ether (350 ml) was added to the dispersion slowly dropwise, and the temperature was raised to 25 C. After stirring for a further hour, the reaction was poured into an aqueous ferric chloride (FeCl3) solution (5 wt %, 100 ml), followed by extraction with ethyl ether (200 ml). An organic layer thus obtained was washed ten times with an aqueous ferric chloride (FeCl3) solution (5 wt %, 100 ml) and then was washed with water until the aqueous layer was clear. Thereafter, water was removed using anhydrous MgSO4 and solvent was also removed to obtain a mixture in the form of a blackish brown liquid of compound a and compound b as shown in scheme I in a molar ratio of 1:1. (0037) The obtained mixture (2.5 g, 6.67 mmol), cuprous iodide (CuI, 128 mg, 0.67 mmol), ferric chloride (FeCl3, 107 mg, 0.67 mmol), sodium hydroxide (NaOH, 540 mg, 13.3 mmol), aqueous ammonia (15 M, 30 ml), and ethanol (EtOH, 30 ml) were placed in a high pressure reaction tube of 150 ml. A reaction was conducted at 90 C. for 12 hours. After the temperature of the content in the reaction dropped to 25 C., ethyl ether (200 ml) was added and the content in the reaction tube was washed three times with an aqueous sodium hydroxide solution (1.0 M, 150 ml). Then, water was removed using anhydrous MgSO4 and solvent was also removed to obtain an orange brown crude product, which was purified by column chromatography (eluent: ethyl acetate/n-hexane=1/2 (v/v)) to obtain aminoferrocene compound c shown in Scheme I in the form of a yellowish brown solid (yield: 48%). (0038) 1H NMR (400 MHz, CDCl3) of aminoferrocene compound c: delta 4.08 (s, 5H), 3.97 (t, J=1.6, 2H), 3.82 (t, J=1.6, 2H), 2.58 (br, 2H).

The synthetic route of 102-54-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; NATIONAL TSING HUA UNIVERSITY; Cheng, Chien-Hong; Lai, Cheng-Chang; Chang, Yu-Wei; Liao, Chuang-Yi; Huang, Min-Jie; (16 pag.)US9356244; (2016); B1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-42-7, Ferrocenecarboxylic acid is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Briefly, to a solution of Fc-COOH (5.65 mmol, 1.3 g) in dry DCM at 0 C, Et3N (6.19 mmol, 0.87 mL), HOBt (6.19 mmol, 0.84 g) and HBTU (6.19 mmol, 2.4 g) were added, reacted 1 h at 0 C, then 1 g H-Gly-OMe by treatment with Et3N in DCM (5 mL) was added.

1271-42-7, As the paragraph descriping shows that 1271-42-7 is playing an increasingly important role.

Reference£º
Article; Zhou, Binbin; Li, Chun-Lan; Hao, Yuan-Qiang; Johnny, Muya Chabu; Liu, You-Nian; Li, Juan; Bioorganic and Medicinal Chemistry; vol. 21; 2; (2013); p. 395 – 402;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, Iron(III) acetylacetonate is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Fe(acac)3 (706 mg, 2 mmol), 1,2-dodecanediol (2.023 g,10 mmol), oleic acid (1.695 g, 6 mmol), oleylamine (1.605 g,6 mmol), and diphenyl ether (20 mL) were mixed and magnetically stirred under a flow of argon. The mixture was heated to 200Cfor 30 min and then heated to 280C for another 30 min. Theblack-brown mixture was cooled to room temperature under argon atmosphere. A black material was precipitated with ethanoland separated via centrifugation. The black product was dissolvedin hexane, precipitated with ethanol, centrifuged to remove the solvent, and dispersed into hexane. Fe3O4nanoparticles wereobtained after evaporation of hexane at room temperature (yield:31%).

14024-18-1, The synthetic route of 14024-18-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yuan, Weizhong; Shen, Jin; Li, Lulin; Liu, Xu; Zou, Hui; Carbohydrate Polymers; vol. 113; (2014); p. 353 – 361;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1293-65-8, 1,1′-Dibromoferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1293-65-8

1,10-Dibromoferrocene [23] (300 mg, 0.87 mmol) was dried for3hat 2*102 mbar in a Schlenk flask. Afterwards, itwas dissolved indry diethylether (2 ml) forming a clear yellow solution. In a separateSchlenk flask diethylether (4 ml) was cooled to 78 C and tertbutyllithiumin n-hexane (2.3 ml, 3.66 mmol,1.6M) was added. Thedissolved 1,10dibromoferrocene was added dropwise to the tertbutyllithiumsolution over a period of 5 min. The resulting mixturewas stirred at 78 C for 1 h. In an additional Schlenk flask NFSI(1.15 g, 3.66 mmol), which had been dried for 3 h in vacuo, wasdissolved in tetrahydrofurane (6 ml). The NFSI solutionwas added tothe reaction mixture within 2 min. Directly after the addition thesolution was quenched with NaBH4 and 20 ml 0.1 M Ca(OH)2.Pentane (50 ml)was added and the two-phase systemwas stirred for1 h. The organic phase was separated and washed 3 times withwater. All solvents were carefully removed in vacuo. The crudeproduct was filtered through alumina (Activity III, diameter 2 cm,length 25 cm) with pentane as mobile phase. After evaporation ofthe solvent, the crude product was purified by HPLC (CH3CN/H2O(70:30); isocratic). The HPLC fractions were extracted with pentane(4 20 ml). The organic phase was dried with MgSO4 and carefullyevaporated in vacuo (the product is volatile). The product was obtainedas a yellow solid.HPLC: CH3CN/H2O (70:30; isocratic). Yellow solid (20 mg,0.09 mmol, 10%);1H NMR (CDCl3): delta 4.39 (app. q, JHH, HF 2.2 Hz, 4H, CpH),3.91e3.89 (app. m, 4H, CpH). 13C NMR (CDCl3): delta 135.9 (d,1JCF 269 Hz, C1,10), 62.5 (d, 3JCF 3.8 Hz, C3,30,4,40), 57.5 (d,2JCF 15.1 Hz, C2,20,5,50). 19F{1H} NMR (CDCl3): delta 189 (s). IR (solid): cm1 3108 (w), 1463 n(C-Caromatic, vs); 1242 n(CeF, m), 1020 (m),803 (vs), 634 (m). MS (EI): m/z 222 [M], 139 [M CpF], 128[Cp2]; calcd for C10H8F2Fe 222.Anal. Calcd for C10H8F2Fe: C, 54.10;H, 3.63. Found: C, 53.33; H, 3.70.

1293-65-8 1,1′-Dibromoferrocene 72376387, airon-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Bulfield, David; Maschke, Marcus; Lieb, Max; Metzler-Nolte, Nils; Journal of Organometallic Chemistry; vol. 797; (2015); p. 125 – 130;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14024-18-1,Iron(III) acetylacetonate,as a common compound, the synthetic route is as follows.

Fe3O4 nanoparticles were prepared by high temperature diolthermal decomposition method. Briefly, 0.5 g Fe(acac)3 and 100 mL benzyl alcohol were added into a flask. The mixture was heated to 200 C and maintained for 2 h. After the flask cooled down, the obtained black precipitations were collected with the help of a magnet and washed thoroughly with ethanol several times. The black product was Fe3O4 nanoparticles.

14024-18-1, As the paragraph descriping shows that 14024-18-1 is playing an increasingly important role.

Reference£º
Article; Liu, Rui; Mi, Shu; Li, Yuanyuan; Chen, Cong; Xie, Yong; Chen, Qiang; Chen, Ziyu; Science China Chemistry; vol. 59; 4; (2016); p. 394 – 397;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-86-5, Ferrocenemethanol is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 1.1 mmol of triethylamine was added to a stirred mixture of 1.0 mmol of metallocene alcohol (7, 8, 12) or 0.45 mmol of ferrocene diol (10, 11) and 1.0 mmol of 4,5-dichloroisothiazole- or 5-arylisoxazole-3-carbonyl chloride in 50 mL of diethyl ether at 20-23C. The reaction mixture was stirred at that temperature during 24 h. The precipitated triethylamine hydrochloride was filtered off and washed with diethyl ether (5 ¡Á 10 mL). The filtrate was washed with 10 % aqueous NaCl and 5 % aqueous NaHCO3. The solvent was removed, and the residue was recrystallized from a benzene-hexane (2 : 1) mixture (14, 15, 19, and 20) or from hexane (16,17, 21, and 22). 3,4,4-Trichloro-1-cymantrenylbut-3-en-1-yl 4,5-dichloroisothiazole-3-carboxylate 18 was obtained as a viscous oil and was used without further purification.

1273-86-5, 1273-86-5 Ferrocenemethanol 10856885, airon-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Potkin; Dikusar; Kletskov; Petkevich; Semenova; Kolesnik; Zvereva; Zhukovskaya; Rosentsveig; Levkovskaya; Zolotar; Russian Journal of General Chemistry; vol. 86; 2; (2016); p. 338 – 343; Zh. Obshch. Khim.; vol. 86; 2; (2016); p. 338 – 343,6;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Iron(III) acetylacetonate, cas is 14024-18-1, it is a common heterocyclic compound, the iron-catalyst compound, its synthesis route is as follows.,14024-18-1

Synthesis of Iron Oxide Nanoparticles [0098] Particles were prepared via a modified method first presented by Sun and Zeng (J. Am. Chem. Soc., 2002, 124, 8204-8205). Briefly, magnetite particles were produced by adding iron(III) acetylacetonate (Fe(acac)3, 0.35 g, 1 mmol) and oleylamine (OAm, 2.5 mL, 17.09 mmol) in 17.5 mL of benzyl ether to a round bottom flask under a nitrogen blanket. The solution was then heated at 3 C. per minute to 300 C. and held isothermally for 1 hour. The particles were purified by repeated washing with ethanol and centrifugation.

With the rapid development of chemical substances, we look forward to future research findings about 14024-18-1

Reference£º
Patent; Clemson University; McNealy, Tamara L.; Mefford, IV, Olin Thompson; Saville, Steven L.; US2014/93550; (2014); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Ferrocenecarboxylic acid, cas is 1271-42-7, it is a common heterocyclic compound, the iron-catalyst compound, its synthesis route is as follows.,1271-42-7

Will ferrocenecarboxylic acid (0.46g, 2mmol),N,N-Dicyclohexyl-carbodiimide (DCC, 0.453 g, 2.2 mmol)Add 1-hydroxybenzotriazole (HOBt, 0.337 g, 2.5 mmol) to a 100 mL round bottom flask and add 20 mLThe dried tetrahydrofuran was added and the mixture was stirred in an ice bath. 10 mL of a dry tetrahydrofuran solution containing DMAP (0.268 g, 2.2 mmol) was slowly added dropwise to the reaction system. After stirring in an ice bath for 30 minutes, the reaction was naturally warmed to room temperature. After the TLC detection reaction was completed, the reaction solution was concentrated under reduced pressure, and the residue was directly separated by column.(V petroleum ether: Ethyl acetate V, 5:1-2:1) Elution of the mobile phase yields 0.638 g of compound Fc-D1., Yield: 92%.

With the rapid development of chemical substances, we look forward to future research findings about 1271-42-7

Reference£º
Patent; Chinese Academy Of Sciences Fujian Structure Of Matter Institute; Yong Jianping; Lu Canzhong; (10 pag.)CN103319543; (2018); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1271-55-2,Acetylferrocene,as a common compound, the synthetic route is as follows.

To a 100 mL round bottom reaction flask was added p-toluenesulfonyl hydrazide (1.5 eq)Methanol was gradually added until the p-toluenesulfonyl hydrazide was completely dissolved.Heated to 60oC,After a small amount of methanol was used to dissolve acetyl ferrocene (1 equivalent) prepared in the previous reaction,Was added dropwise to p-toluenesulfonyl hydrazide solution,Stirring to reflux to a large amount of solid precipitation.Suction filtered, washed with petroleum ether,Dry, getAcetylferrocene p-toluenesulfonyl hydrazone.Yield 81%.

1271-55-2, The synthetic route of 1271-55-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Inner Mongolia University; Zhang Hao; Ling Li; Hu Jianfeng; Huo Yanhong; (11 pag.)CN107226829; (2017); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1287-16-7,Ferrocenylacetic acid,as a common compound, the synthetic route is as follows.

Example 1 – Preparation of ferrocene modified phospholipid (3)[0064] Ferrocene modified phospholipid (FC-DSP) was prepared in the following manner: triethylamine (0.077 mmol, 0.01 ml_, 1.4 eq) and N,N-dicyclohexylcarbodiimide (0.077 mmol, 15.9 mg, 1.4 eq) were added to a solution that contained 1 ,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (0.055 mmol, 35 mg, 1.0 eq) and ferroceneacetic acid (0.077 mmol, 18.8 mg, 1.4 eq) in anhydrous DCM (1.5 ml_). The reaction was stirred overnight, until N MR indicated conversion to the coupling was completed. The solution was concentrated under vacuum and then was purified on iatrobeads gel chromatography ( 10% MeOH : DCM). A dark-brown oil (29.4 mg, 0.0341 mmol) was obtained (62% yield). H N MR (300 MHz, CDCI3) delta 7.04 (br, 1 H), 5.23 (br, 1 H), 4.37 (br, 1 H), 4.22 (br, 2H), 4.12 (br, 5H), 3.94 (br, 2H), 3.49 (br, 4H), 3.28 (br, 2H), 3.05 (br, 4H), 2.28 (br, 4H), 1.58 (br, 4H), 1.25 (br, 40H), 0.87 (t, J = 6.5 Hz, 6H).3P NMR (122 MHz, CDCI3) delta 0.15 (s).3C N MR (75 MHz, CDCI3) delta 173.60 (s), 173.21 (s), 70.56 (s), 69.26 (s), 68.92 (s), 68.14 (s), 62.82 (s), 45.87 (s), 34.44 (s), 34.25 (s), 32.05 (s), 29.80 (s), 29.65 (s), 29.49 (s), 29.29 (s), 25.02 (s), 22.81 (s), 14.24 (s), 8.73 (s). HRMS (ESI): Calc. for C45H76FeN09P (M+H)+: 862.4680; found : 862.4624., 1287-16-7

As the paragraph descriping shows that 1287-16-7 is playing an increasingly important role.

Reference£º
Patent; THE ROYAL INSTITUTION FOR THE ADVANCEMENT OF LEARNING/MCGILL UNIVERSITY; TRANSFERT PLUS SOCIETE EN COMMANDITE; MAUZEROLL, Janine; NOYHOUZER, Tomer Aharon; SNOWDEN, Michael Edward; DAUPHIN DUCHARME, Philippe; MAZURKIEWICZ, Stephani; L’HOMME, Chloe; DESJARDINS, Samuel; CANESI, Sylvain; (84 pag.)WO2016/115626; (2016); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion