Category: 12093-10-6

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: O-amino amides 1a-e (1 equiv.) and carbonyl compounds 2a-o (1.2 equiv.) were microwave irradiated (standard mode) in the presence of Phosphotungstic acid/HPW (50 % w/w) at 200 W for 3 min. After the completion of the reaction (Monitored by TLC), HPW was filtered off using celite bed/Silica bed. The crude product was purified on silica gel a column chromatography to afford the corresponding spiro and cyclic quinazolinones 3a-3n, 4a-4h, and 5a, 5b in very good yields except compounds 6a and 7a were obtained in poor yields (Eluent: n-Hexane /EtOAc). All the compounds 3a-3n, 4a-4h, 5a-b, 6a and 7a were thoroughly characterized by 1H NMR, 13CNMR, FTIR and HRMS.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference：
Article; Novanna, Motakatla; Kannadasan, Sathananthan; Shanmugam, Ponnusamy; Tetrahedron Letters; vol. 60; 2; (2019); p. 201 – 206;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a suspension of methyltriphenylphosphonium bromide (1equiv.) in dry THF (100 mL), under nitrogen atmosphere at room temperaturewas added potassium tert-butoxide (7.0 equiv.). The solutionwas stirred for 1 h and then a solution of the aldehyde (1 equiv.) indry THF (30 mL) was added slowly. The mixture was stirred at roomtemperature for 12 h andwas evaporated to dryness. The unreacted potassiumtert-butoxide was quenched with saturated NH4Cl solution(10 mL). The reaction mixture was then extracted with CHCl3(200 mL), washed with water (2 × 200 mL), brine (100 mL) and then dried over anhydrous Na2SO4. Evaporation of the organic layer gave aresidue, which was purified by column chromatography using hexaneas the eluting solvent to give the corresponding vinyl compounds.

The chemical industry reduces the impact on the environment during synthesis,12093-10-6,Ferrocenecarboxaldehyde,I believe this compound will play a more active role in future production and life.

Reference：
Article; Ravivarma, Mahalingam; Kumar, Kaliamurthy Ashok; Rajakumar, Perumal; Pandurangan, Arumugam; Journal of Molecular Liquids; vol. 265; (2018); p. 717 – 726;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is Ferrocenecarboxaldehyde, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: To a solution of acetophenone derivative (1 equiv.) in dry THF (4 mL/mmol) was added sodium hydride (4 equiv.). The resulting mixture was stirred at 25 C for 30 min and ferrocene carboxaldehyde (1.5 equiv.) was added in dry THF (4 mL/mmol) and the mixture was stirred at 25 C for 4-8 h. After the disappearance of the starting material on TLC, the solution was poured into 1M hydrochloric acid and extracted with CH2Cl2. The combined organic layers were washed with water, dried over anhydrous magnesium sulfate, filtered and concentrated under reduced pressure.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Peres, Basile; Nasr, Rachad; Zarioh, Malik; Lecerf-Schmidt, Florine; Di Pietro, Attilio; Baubichon-Cortay, Helene; Boumendjel, Ahcene; European Journal of Medicinal Chemistry; vol. 130; (2017); p. 346 – 353;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: The substituted ketone (3 mmol) and KOH(0.2 g) were dissolved in ethanol (5 mL) in a round bottomedflask and stirred at room temperature (25 C) for 10 min. Anethanolic solution of the substituted aromatic aldehyde (3 mmol,5 mL) was added drop wise and the mixture was stirred at roomtemperature. The progress of the reaction was monitored by TLCon silica gel sheets. The reaction was stopped by neutralizingthe stirred solution with 2 M HCl. In most of the cases the productwas obtained as a dark red precipitate after neutralization. It wasthen removed by filtration, washed with water. In the absence ofa precipitate on neutralization, the solution was extracted withethyl acetate (20 mL ¡Á 3). The organic layer was dried overanhydrous sodium sulphate and removed by evaporation underreduced pressure to give a liquid residue. The latter was passedthrough a column of silica gel (230-400 mesh) and eluted withTHF-hexane (1:4) to yield pure compound. All the synthesizedcompounds were well characterized by spectroscopic methodssuch as IR, NMR, Mass and elemental analysis and their spectralcharacteristics were found to be in good general agreement withthose found in literature30.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mukhtar, Sayeed; Manasreh, Waleed Atef; Parveen, Humaira; Azam, Amir; Asian Journal of Chemistry; vol. 26; 24; (2014); p. 8407 – 8412;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a typical procedure, 1.39 mmol of 2?-hydroxyacetophenone (for 1 and 3) or 2?-hydroxy-4?-methoxyacetophenone (for 2 and 4) were dissolved in 40 ml of methanol. To this solution, 4 equivalent of potassium hydroxide were added and stirred for 15 min at room temperature. Then, 1.40 mmol of the appropriate ferrocenecarboxaldehyde derivative, (i.e. 1-ferrocenecarboxaldehyde for 1 and 2 or 1,1-ferrocenedicarboxaldehyde for 3 and 4) were added. The mixture was stirred during three days at room temperature. Then, methanol was evaporated in vacuum (rotary evaporator) and the crude reaction mixture was submitted to column chromatography (silica gel 60, Ethyl acetate: Hexane = 3:10 v/v). (E)-3-Ferrocenyl-1-(2-hydroxyphenyl)-prop-2-en-1-one, (1). Yield 65% (605 mg), mp. 157-159.4 C. IR (KBr) cm-1: 3456 (OH), 3105 (C-H), 3086 (C-H), 1630 (C=O). 1H NMR (CDCl3, 400 MHz): delta 4.22 (5H, s, C5H5), 4.56 (2H, s, H-beta-C5H4), 4.65 (2H, s, H-alpha -C5H4), 6.95 (1H, t, J = 7.2 Hz, Harom), 7.26 (1H, d, J = 15 Hz, =CH), 7.45 (1H, t, J = 7.2 Hz, Harom), 7.88 (1H, d, J = 9.1 Hz, Harom), 7.92 (1H, d, J = 15 Hz, =CH), 13.08 (1H, s, OH). 13C NMR (CDCl3, 400 MHz): delta: 31.34, 69.51, 69.71, 70.36, 72.27, 117.15, 119.00, 119.10, 129.79, 136.30, 148.36, 164.03, 193.17. Uv-vis: 528 nm (704.5 cm-1M-1), 340 nm (8400 cm-1M-1). Analysis calculated for C19H16O2Fe: C, 68.70; H, 4.86. Found: C, 68.22; H, 4.76.

The chemical industry reduces the impact on the environment during synthesis,12093-10-6,Ferrocenecarboxaldehyde,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Trujillo, Alexander; Ocayo, Fernanda; Artigas, Vania; Santos, Juan C.; Jara-Ulloa, Paola; Kahlal, Samia; Saillard, Jean-Yves; Fuentealba, Mauricio; Escobar, Carlos A.; Tetrahedron Letters; vol. 58; 5; (2017); p. 437 – 441;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a suspension of methyltriphenylphosphonium bromide (1equiv.) in dry THF (100 mL), under nitrogen atmosphere at room temperaturewas added potassium tert-butoxide (7.0 equiv.). The solutionwas stirred for 1 h and then a solution of the aldehyde (1 equiv.) indry THF (30 mL) was added slowly. The mixture was stirred at roomtemperature for 12 h andwas evaporated to dryness. The unreacted potassiumtert-butoxide was quenched with saturated NH4Cl solution(10 mL). The reaction mixture was then extracted with CHCl3(200 mL), washed with water (2 ¡Á 200 mL), brine (100 mL) and then dried over anhydrous Na2SO4. Evaporation of the organic layer gave aresidue, which was purified by column chromatography using hexaneas the eluting solvent to give the corresponding vinyl compounds.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ferrocenecarboxaldehyde, 12093-10-6

Reference£º
Article; Ravivarma, Mahalingam; Kumar, Kaliamurthy Ashok; Rajakumar, Perumal; Pandurangan, Arumugam; Journal of Molecular Liquids; vol. 265; (2018); p. 717 – 726;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Ferrocene carboxyl aldehyde (0.100 g, 0.467 mmol) was dissolved in ethanol (8 mL), was added slowly in small portions sodium borohydride (0.090 g, 2.4mmol) at 0 . The reaction mixture was stirred at ambient temperature for 3 hours. It was add water (3mL) and dichloromethane (10 mL) in turn to complete the reaction.The organic layer was separated and the remaining water layer was extracted three times with dichloromethane (15mL x 3). The combined organic layer is washed with a saturated aqueous sodium chloride solution, placed into the over anhydrous sodium sulfate, filtered under reduced pressure. After removal of all the solvent in the filtrate under reduced pressure was purified by column chromatography (hexane: ethyl acetate: methanol = 15: 5: 1) to give the compound 2a to give a yellow solid. (0.090 g, 89%)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ferrocenecarboxaldehyde, 12093-10-6

Reference£º
Patent; Diatech Korea Co. Ltd.; Sogang University Research Foundation; Moon, PongJin; Oh, HaNa; Kang, NaNa; Cheon, AeRan; Park, Gye Shin; Park, Hyeong Soon; Pang, Choo Young; (31 pag.)KR101583811; (2016); B1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: To a solution of [CpRu(PPh3)2Cl] (1 mol%) and solid aldehyde (1.0 mmol) in toluene (3 ml) was added PhSiH3 (1.2 mmol). The reaction mixture was stirred at reflux temperature under an air atmosphere (the reaction times are indicated in Table 4). Then, TBAF (1.0 mmol) was added and the reaction mixture was stirred at room temperature during 30 min. After evaporation, the reaction mixture was purified by silica gel column chromatography with ethyl acetate:n-hexane (1:3) to afford the corresponding alcohols.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Cabrita, Ivania R.; Florindo, Pedro R.; Fernandes, Ana C.; Tetrahedron; vol. 73; 11; (2017); p. 1511 – 1516;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: To a stirred suspension of p-toluenesulfonyl hydrazide (1eq.) in water (12mL) and three drops of HCl 32%, the formyl or acetyl organometallic precursor (1eq.) was added. The resulting mixture was stirred for 18h at room temperature. The precipitate obtained was washed with water (2¡Á10mL) and dried under vacuum. The hydrazone derivatives were recrystallized from acetone/hexane (1:5) at -18C

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Concha, Camila; Quintana, Cristobal; Klahn, A. Hugo; Artigas, Vania; Fuentealba, Mauricio; Biot, Christophe; Halloum, Iman; Kremer, Laurent; Lopez, Rodrigo; Romanos, Javier; Huentupil, Yosselin; Arancibia, Rodrigo; Polyhedron; vol. 131; (2017); p. 40 – 45;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: The ferrocenecarboxaldehyde (2.0mmol) and the acetyl pyridine or amino acetophenone derivatives (2.0mmol) were added to a round bottom flask at rt. Then, a freshly prepared NaOH solution (0.5mmol in 1.0 mL each of H2O and EtOH) was added dropwise and left stirring at rt. When completed, the resulting product was filtered at reduced pressure, washing with cold water. The crude product was then recrystallized as described. Compound 2a: 3-ferrocenyl-1-(2-pyridinyl) prop-2-en-1-one was obtained as dark violet crystals after recrystallization using acetone:H2O mixture. Yield: 0.41g (64%) of pure product. 1H NMR (500MHz, CDCl3): delta=8.73 (s, 1H), 8.18 (d, J=7Hz, 1H), 7.89 (s, 1H), 7.86 (d, J=4Hz, 2H), 7.46 (s, 1H), 4.67 (s, 2H), 4.49 (s, 2H), 4.18 (s, 5H). 13C NMR (125MHz, CDCl3): delta=188.5, 154.7, 148.8, 147.2, 137.0, 126.5, 122.9, 117.8, 79.5, 71.5, 69.9, 69.5. FT-IR (neat) numax (cm-1): 1659 (m), 1591 (m), 1574 (w), 1462 (w), 1396 (m).

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Delgado-Rivera, Sara M.; Perez-Ortiz, Giovanny E.; Molina-Villarino, Andres; Morales-Fontan, Fabiel; Garcia-Santos, Lyannis M.; Gonzalez-Albo, Alma M.; Guadalupe, Ana R.; Montes-Gonzalez, Ingrid; Inorganica Chimica Acta; vol. 468; (2017); p. 245 – 251;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion