Iron catalyst

1273-82-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Aminoferrocene, cas is 1273-82-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1a was synthesized by modifying the reported procedure [44]. Catalytic amount of p-toluene sulfonic acid (20mg, 0.10mmol) was added to a mixture of pyrrole-2-carbaldehye (380mg, 4.0mmol) and 1-amino-2-methoxybenzene (490mg, 4.0mmol) in methanol (10mL) under stirring condition in nitrogen atmosphere. The resulting mixture was heated to reflux for 20h, and then cooled to room temperature. After removal of volatiles under reduced pressure, the residue was mixed with THF and filtered through a pad of celite. The resulting solution was concentrated to give a brown solid, which was further purified by re-dissolved in THF/ether (1:4). The solution was kept at -18C for overnight, and brown crystalline solid was collected by filtration. The solid was washed with ether and further dried under vacuum to obtain 1a. Yield 270mg (68%). m.p. 235-236C. 1H NMR (400MHz, CDCl3) delta 10.07 (s, 1H, NH), 8.30 (s, 1H, CH=N), 7.20 (dt, J=7.6, 1.6Hz, 1H, Ar-H), 7.05 (d, J=1.6Hz, 1H, Ar-H), 7.01 (d, J=7.6Hz, 1H, Ar-H), 6.98 (d, J=7.6Hz, 1H, Ar-H), 6.88 (d, J=1.2Hz, 1H, Py-H), 6.70 (dd, J=1.2, 3.6Hz, 1H, Py-H), 6.30 (d, J=3.6Hz, 1H, Py-H), 3.88 (s, 3H, CH3). 13C NMR (100MHz, CDCl3) delta 152.52, 150.71, 141.82, 130.95, 126.63, 123.32, 121.36, 120.74, 116.69, 111.42, 110.47, 55.84. MS (ESI) m/z: 200.5. Anal. Calcd for C12H12N2O: C 71.98, H 6.04, N 13.99. Found: C 71.96, H 6.30, N 13.83.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Aminoferrocene, 1273-82-1

Reference£º
Article; Zhuo, Ji-Bin; Ma, Zai-He; Lin, Cai-Xia; Xie, Li-Li; Bai, Sha; Yuan, Yao-Feng; Journal of Molecular Structure; vol. 1085; (2015); p. 13 – 20;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-51-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Vinylferrocene, cas is 1271-51-8,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Ethynylferrocene (1) (0.5 g, 2.380 mmol) was dissolved in dryethanol (35 mL) and cooled to 0 ¡ãC and subsequently treated withsolid KOH (0.340 g, 6 mmol). After 30 min of stirring at a lowtemperature solid N-iodosuccinimide (0.642 g, 2.856 mmol) wasadded to the mixture, and the stirring continued at 0 ¡ãC for additional30 min. The cold bath was then removed and the stirringcontinued at room tempreture for an additional 2 h. Aftercompletion of reaction (monitored by TLC) 100 mL of EtOAc wasadded and the mixture extracted three times with brine. Theorganic layer was separated, dried over Na2SO4, filtered, andevaporated. The productwas isolated in quantitative yield as brownSolid.Yield: 94percent (brown solid); m.p 112-115 ¡ãC (lit. 116-117 C) [47];1H NMR (500 MHz, CDCl3): delta 4.18-4.23 (m, 7H), 4.44-4.47 (m,2H) ppm; 13C NMR (75 MHz, CDCl3): delta 66.4, 69.4, 69.5, 70.6, 70.7,70.77, 70.84, 70.9, 72.5, 74.3, 92.8 ppm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Vinylferrocene, 1271-51-8

Reference£º
Article; Yousuf, Md; Mukherjee, Debarati; Dey, Somaditya; Pal, Chiranjib; Adhikari, Susanta; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 468 – 479;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A slurry of Fe(acac)3 (25 mg) in benzylalcohol (5.0 g)with carbon sphere (50 mg) was heated to 180 C under anargon atmosphere. The reaction mixture was maintainedat this temperature for 3 h, and the resulting dark-brownreaction mixture was cooled to room temperature. Theresidue was washed with ethanol to provide dark-brownCarbon/Fe3O4 powders with particle sizes of 320¡À27 nm.The Carbon/Fe3O4 powders were loaded in an aluminaboat in a box furnace and were annealed at 500 C for3 h under an atmospheric pressure of air, producing hollowFe2O3 nanospheres.

The chemical industry reduces the impact on the environment during synthesis,14024-18-1,Iron(III) acetylacetonate,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Oh, Kyung Hee; Park, Hyung Ju; Kang, Shin Wook; Park, Ji Chan; Nam, Ki Min; Journal of Nanoscience and Nanotechnology; vol. 18; 2; (2018); p. 1356 – 1360;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-51-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Vinylferrocene, cas is 1271-51-8,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A mixture of vinylferrocene (1 mmol), K2CO3 (2.5or 5 mmol), tetrabutylammonium tetrafluoroborat (2.5 or 5 mmol),the given amount of appropriate bromine-substituted compoundand catalytic amount of Pd(OAC)2 in 10 ml DMF was stirred at 80 ¡ãCunder argon atmosphere overnight. After the completion of thereaction, the cooled mixture was filtered, diluted with CH2Cl2(50 ml) and washed with H2O (3 x 50 ml). The organic phase was dried over Na2SO4, filtered and the solvent was removed under thereduce pressure. The crude products were purified by columnchromatography on silica gel with hexane/EtOAC as eluent. Specificdetails for each compound are given below.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1271-51-8, Vinylferrocene

Reference£º
Article; Teimuri-Mofrad, Reza; Rahimpour, Keshvar; Ghadari, Rahim; Journal of Organometallic Chemistry; vol. 846; (2017); p. 397 – 406;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

The synthesis of hybrid magnetite-gold nanoparticles with core-shell structure has been carried out referring to a protocol available in the literature [24] . Reagents. Iron (III) acetylacetonate (Fe (acac) 3, 99%), 1,2- hexadecanediol ( C14H29CH (OH) CH2 (OH) , 90%), oleylamine (OAM, C9H18=C9H17NH2 , 70%) , oleic acid (OA, C9H18=C8H15-COOH, 99%), diphenyl ether ( C12H10O, 99%) , gold chloride (Au(Cl) – 3 H20, 99%) and other solvents (hexane and ethanol) (Sigma Aldrich) . 0.355 g of Fe (acac) 3 have been mixed in 10 ml of diphenyl ether with 1 ml of oleic acid, 1 ml of oleylamine, under argon atmosphere and vigorous stirring. Successively, 1 , 2-hexadecanediol is added to the solution. The resulting solution is warmed up to 200 C and kept under reflux for 2 h. The amounts of the used reagents are reported in Table 1. Table 1 Diphenyl ether 10 g Once the solution has been taken to room temperature, the reaction mixture has been used without any separation. In a typical synthesis, to 5 ml of the reaction solution of Fe304 nanoparticles in diphenyl ether 0.415 g of Au (CI) 3 -3H20, 1.55 g of 1 , 2-hexadecanediol, 0.25 ml of oleic acid, 1.5 ml of oleylamine and 15 ml of diphenyl ether have been added. Under argon atmosphere and vigorous stirring this mixture is warmed up to 200 C and kept in such condition for 1.5 h. The amounts of the used reagents are reported in Table 2. Table 2 Once the reaction mixture has been cooled up to room temperature ethanol has been added. A material of dark color has been precipitated by means of a centrifuge (one cycle of 20 minutes at 10000 rpm) The precipitate has been washed with ethanol and redispersed in hexane in the presence of 75 mM oleic acid and oleylamine. The nanoparticles solution has shown a dark red color.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Iron(III) acetylacetonate, 14024-18-1

Reference£º
Patent; PADUANO, Luigi; D’ERRICO, Gerardino; MONTESARCHIO, Daniela; VITIELLO, Giuseppe; MANGIAPIA, Gaetano; LUCHINI, Alessandra; IRACE, Carlo; COLONNA, Alfredo; SANTAMARIA, Rita; WO2014/64574; (2014); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a typical procedure, 1.39 mmol of 2?-hydroxyacetophenone (for 1 and 3) or 2?-hydroxy-4?-methoxyacetophenone (for 2 and 4) were dissolved in 40 ml of methanol. To this solution, 4 equivalent of potassium hydroxide were added and stirred for 15 min at room temperature. Then, 1.40 mmol of the appropriate ferrocenecarboxaldehyde derivative, (i.e. 1-ferrocenecarboxaldehyde for 1 and 2 or 1,1-ferrocenedicarboxaldehyde for 3 and 4) were added. The mixture was stirred during three days at room temperature. Then, methanol was evaporated in vacuum (rotary evaporator) and the crude reaction mixture was submitted to column chromatography (silica gel 60, Ethyl acetate: Hexane = 3:10 v/v). (E)-3-Ferrocenyl-1-(2-hydroxyphenyl)-prop-2-en-1-one, (1). Yield 65% (605 mg), mp. 157-159.4 C. IR (KBr) cm-1: 3456 (OH), 3105 (C-H), 3086 (C-H), 1630 (C=O). 1H NMR (CDCl3, 400 MHz): delta 4.22 (5H, s, C5H5), 4.56 (2H, s, H-beta-C5H4), 4.65 (2H, s, H-alpha -C5H4), 6.95 (1H, t, J = 7.2 Hz, Harom), 7.26 (1H, d, J = 15 Hz, =CH), 7.45 (1H, t, J = 7.2 Hz, Harom), 7.88 (1H, d, J = 9.1 Hz, Harom), 7.92 (1H, d, J = 15 Hz, =CH), 13.08 (1H, s, OH). 13C NMR (CDCl3, 400 MHz): delta: 31.34, 69.51, 69.71, 70.36, 72.27, 117.15, 119.00, 119.10, 129.79, 136.30, 148.36, 164.03, 193.17. Uv-vis: 528 nm (704.5 cm-1M-1), 340 nm (8400 cm-1M-1). Analysis calculated for C19H16O2Fe: C, 68.70; H, 4.86. Found: C, 68.22; H, 4.76.

The chemical industry reduces the impact on the environment during synthesis,12093-10-6,Ferrocenecarboxaldehyde,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Trujillo, Alexander; Ocayo, Fernanda; Artigas, Vania; Santos, Juan C.; Jara-Ulloa, Paola; Kahlal, Samia; Saillard, Jean-Yves; Fuentealba, Mauricio; Escobar, Carlos A.; Tetrahedron Letters; vol. 58; 5; (2017); p. 437 – 441;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenylacetic acid, and cas is 1287-16-7, its synthesis route is as follows.

1)1 mmol of ferrocenyl acetic acid and 1 mmol of 3-phenyl-4-amino-3-mercapto-1,2,4-oxadiazole were added,Added to a dry 250mL single-necked flask,Then 0.1 mmol p-toluenesulfonic acid,Then 5 mL of DMF was added thereto,The glass rod is stirred to dissolve it.2)The round bottom flask was placed in a microwave reactor,350W under irradiation once every 30s,The duration of irradiation is 3min.After irradiation,cool down.3)Pour it into a crushed beaker,With potassium carbonate and potassium hydroxide pH = 7,Placed overnight,filter,Washed,dry,The crude product of 3-phenyl-6-ferrocenylmethylene-1,2,4-triazolo [3.4-b] -1,3,4-thiadiazole was obtained,Using a solvent of DMF and absolute ethanol in a volume ratio of 2: 1 mixed solvent,The crude product was recrystallized to give a brown solid,The yield is 81%

1287-16-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1287-16-7 ,Ferrocenylacetic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shaanxi University of Science and Technology; Liu, Yuting; Song, Simeng; Yin, Dawei; Jiang, Shanshan; Liu, Beibei; Yang, Aning; Wang, Jinyu; Lyu, Bo; (13 pag.)CN104231004; (2017); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-82-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Aminoferrocene, cas is 1273-82-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

The aminoferrocene compound (300 mg, 1.49 mmol) obtained in Preparation Example 1, 4-bromobiphenyl (380 mg, 1.64 mmol), palladium acetate (Pd(OAc)2, 17 mg, 0.075 mmol), 1,1?-bis(diphenylphosphino)ferrocene (dppf, 67 mg, 0.12 mmol), and sodium tert-butoxide (NaOtBu, 577 mg, 6 mmol) were mixed in toluene (5 ml, as a solvent). A reaction was conducted at 90 C. for 72 hours. The reaction was poured into pure water and was extracted five times with ethyl ether (60 ml). The organic layer thus obtained was dried using anhydrous magnesium sulfate. After the solvent was removed, purification was conducted by column chromatography (eluent: n-butane/ethyl acetate=3/2 (v/v)) to obtain compound BPAFc in the form of an orange solid (yield: 68%). The structure of compound BPAFc is shown in Scheme II.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Aminoferrocene, 1273-82-1

Reference£º
Patent; NATIONAL TSING HUA UNIVERSITY; Cheng, Chien-Hong; Lai, Cheng-Chang; Chang, Yu-Wei; Liao, Chuang-Yi; Huang, Min-Jie; (16 pag.)US9356244; (2016); B1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Aminoferrocene, and cas is 1273-82-1, its synthesis route is as follows.

General procedure: Aminoferrocene (1, 11.0 mg, 0.0547 mmol) was dissolved in 9 cm3 toluene. Formylphenylboronic acid (2, 8.2 mg,0.0547 mmol) was dissolved in 1 cm3 dry ethanol. Both reagent solutions were mixed in an evaporating flask. The solvents were removed under reduced pressure on a rotary vacuum evaporator (the water bath temperature strictly below 40 C) to give [(ferrocenylimino)methyl]phenylboronic acid 3 as a violet/red powder; 18.2 mg (quant.). The products were used as prepared without need of a further purification (Fig. 5).

1273-82-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1273-82-1 ,Aminoferrocene, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Konhefr, Martin; Lacina, Karel; Langmajerova, Monika Skrutkova; Glatz, Zden?k; Skladal, Petr; Mazal, Ctibor; Monatshefte fur Chemie; vol. 148; 11; (2017); p. 1953 – 1958;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

The magnetic nanoparticles were synthesized according to a previously reported procedure26. Briefly, a solution of Fe(acac)3 (5.65 g, 0.016 mol), benzyl ether (80 mL) and oleylamine (80 mL) was heated to 110 C and allowed to reflux for 1 h with vigorous stirring. The temperature was raised to 210 C and then refluxed for 2 h under an argon atmosphere. After cooling to room temperature, the reaction mixture was centrifuged at 10,000 rpm for 20 min, affording the magnetic nanoparticles (Fe3O4) as a black solid. The magnetic nanoparticles were then dispersed in a mixture of 1-propanol (180 mL), conc. NH4OH (25 mL) and deionized water (18 mL) in a 500 mL round-bottom flask by ultra-sonication for 30 min under an argon atmosphere. Following this, tetraethylorthosilicate (TEOS) (6 mL, 0.027 mol) was added dropwise for 30 min with vigorous stirring. After stirring at room temperature for 6 h, thesilica-coated magnetic nanoparticles (Fe3O4(at)SiO2) were separated from the solution using an external magnet and then washed twice successively with 1-propanol and deionized water, respectively. The Fe3O4(at)SiO2 nanoparticles (brown solid) were then dried under vacuum at 60 C for 6 h, prior to use.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Iron(III) acetylacetonate, 14024-18-1

Reference£º
Article; Wechakorn, Kanokorn; Chanpanich, Pairsunan; Kamkalong, Pimfa; Anantachisilp, Suranan; Oriental Journal of Chemistry; vol. 35; 3; (2019); p. 1054 – 1061;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion