Iron catalyst

Name is Ferrocenemethanol, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 1273-86-5, its synthesis route is as follows.

General procedure: To a mixture of 1.0 mmol of ferrocenylcarbinol and 1.0 mmol of the corresponding heterocycle in 1.0 ml of methylene dichloride, 0.18 ml of 45 % aqueous solution of fluoroboric acid was added under vigorous stirring. The agitation was continued for 5 min then Et2O (15 ml), the same amount of cold water, and 5-10 mg of ascorbic acid were added to the reaction flask. After vigorous shaking of the mixture the organic solution was separated, washed with cold water (3¡Á15 ml), the solvent was removed and the residue was dried over CaCl2. All types of products (pyrrolidine as well as imidazolidine and thiazolidine derivatives) were equally purified, namely by column chromatography (silica, eluent hexane EtOAc 3:1), and solids obtained after chromatography were crystalized from ethanol.

1273-86-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1273-86-5 ,Ferrocenemethanol, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Rogatkina, Elena Yu.; Ivanova, Anna S.; Rodionov, Alexey N.; Peregudov, Alexander S.; Korlyukov, Alexander A.; Volodin, Alexander D.; Belousov, Yury A.; Simenel, Alexander A.; Arkivoc; vol. 2018; 5; (2018); p. 272 – 282;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

It is a common heterocyclic compound, the iron-catalyst compound, Iron(III) acetylacetonate, cas is 14024-18-1 its synthesis route is as follows.

General procedure: For the sol-gel route, stoichiometric amounts of Fe(NO3)3¡¤9H2O, Mg(NO3)2¡¤6H2O and Mn(NO3)2¡¤4H2O were dissolved into 5 mL of C2H6O2 in a 100 mL beaker. This solution was stirred for 2 h at 40 C, and then the obtained sol was heated up to 80 C and kept at this temperature until a brown gel was formed. The gel was aged for 2 h at room temperature and then dried at 95 C for 72 h. Subsequently, the dried gel was heat treated at 400, 500 or 600 C in air for 30, 60, 90 or120 min. The obtained products were milled and then washed several times with ethanol, in order to remove the ethylene glycol excess. Finally, the powders were dried at room temperature. For the thermal decomposition method, stoichiometric amounts of the acetylacetonates of Fe, Mg and Mn, phenyl ether and oleic acid were placed in a threenecked flask of 250 mL. Subsequently, a thermometer was placed in one of the side necks and a reflux system was adapted. The solution was heated up to 250 C and it was maintained at this temperature for 30, 60 or 90 min. Once the reaction time passed, a precipitate was obtained, which was washed repeatedly with ethanol. Finally, the precipitate was dried at room temperature and milled. The characterization of the products was carried out by X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and transmission electron microscopy (TEM).

14024-18-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,14024-18-1 ,Iron(III) acetylacetonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; De-Leon-Prado, Laura Elena; Cortes-Hernandez, Dora Alicia; Almanza-Robles, Jose Manuel; Escobedo-Bocardo, Jose Concepcion; Sanchez, Javier; Reyes-Rdz, Pamela Yajaira; Jasso-Teran, Rosario Argentina; Hurtado-Lopez, Gilberto Francisco; Journal of Magnetism and Magnetic Materials; vol. 427; (2017); p. 230 – 234;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Iron(III) acetylacetonate, and cas is 14024-18-1, its synthesis route is as follows.

177 mg of Fe (acac) 3 (0.5 mmol) Is dissolved in diphenyl ether 0.56 mL of oleic acid (1.5 mmol), 0.64 mL of oleylamine (1.5 mmol) And 646 mg of 1,2-hexadecane diol (2.5 mmol) At 260 C for 1 hour 30 minutes Min in a nitrogen atmosphere. The gold-coated nanoparticles of the iron oxide core nanoparticles prepared by the above reaction were subjected to the following procedure Respectively. To 10 mL of iron oxide nanoparticle solution, 0.3 g Of gold acetate, 0.1 mL of oleic acid (0.3 mmol), 0.45 ML of oleylamine (1.1 mmol) and 800 mg of 1,2-hexadecane diol (3.1 mmol) was added 180 degrees to 1 hour 30 Min in a nitrogen atmosphere. After the temperature was dropped to room temperature, ethanol was added to precipitate And centrifuged at 7,000 rpm for 10 minutes.

14024-18-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,14024-18-1 ,Iron(III) acetylacetonate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Korea Atomic Energy Research Institute; Park, Jung Chan; Jung, Myung Hwan; (9 pag.)KR2016/82202; (2016); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-82-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Aminoferrocene, cas is 1273-82-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The organometallic compounds derived from 5-nitrothiophene were prepared following the same procedure as of their 5-nitrofurane analogues [14]. Equimolar amounts of the amino compound and 5-nitro-2-thiophenecarboxaldehyde were dissolved in anhydrous benzene (20mL) and refluxed for 1h under a nitrogen atmosphere. After, the solvent was removed under vacuum and the colored solids obtained were purified by crystallization from CH2Cl2/hexane (1:5) at -18C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1273-82-1, Aminoferrocene

Reference£º
Article; Arancibia, Rodrigo; Klahn, A. Hugo; Buono-Core, Gonzalo E.; Contreras, Daniel; Barriga, German; Olea-Azar, Claudio; Lapier, Michel; Maya, Juan D.; Ibanez, Andres; Garland, Maria Teresa; Journal of Organometallic Chemistry; vol. 743; (2013); p. 49 – 54;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

It is a common heterocyclic compound, the iron-catalyst compound, Ferrocene, cas is 102-54-5 its synthesis route is as follows.

General procedure: A solution of acid chloride (63 mmol) in 30 mL drydichloromethane was added to a suspension of anhydrousaluminum chloride (8.41 g, 63 mmol) in 30 mLdry dichloromethane, and the mixture was stirred at 5 Cfor 1 h under Argon. The solution of aluminum chloride/acid chloride complex was added dropwise over 30 minto a solution of ferrocene (11.16 g, 60 mmol) in 100 mLdry dichloromethane at 0 C. The reaction mixture waswarmed to room temperature and stirred for 16 h. A solutionof NaBH4(2.38 g, 63 mmol) in 25 mL diglyme wasadded dropwise to the purple reaction mixture at -5 C. Anorange solution was formed and stirred at 0 C for 1 h. Themixture was then hydrolyzed with addition of 20 mL waterwhile maintaining its temperature at less than or equal to10 C. The mixture was allowed to separate by settling,and the organic phase was then withdrawn. The aqueousphase was extracted with 3 times 30 mL of dichloromethane,and then all the organic phases are combined. Combinedorganic layer was washed with 50 mL of brine. Afterthe drying of organic layer on the Na2SO4,dichloromethanewas distilled under atmospheric pressure. The diglymeand the residual ferrocene which was found to be entrainedby the diglyme were then distilled at reduced pressureapproximately 20 mm Hg and a column head temperatureof 85-95 C. The alkylferrocene derivatives were distilledat a more reduced pressure, less than 5 mm Hg.

102-54-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,102-54-5 ,Ferrocene, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Teimuri-mofrad, Reza; Safa, Kazem D.; Abedinpour, Saiedeh; Rahimpour, Keshvar; Journal of the Iranian Chemical Society; vol. 14; 10; (2017); p. 2177 – 2185;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is Iron(III) acetylacetonate, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 14024-18-1, its synthesis route is as follows.

To prepare nanosized iron(III) oxide, 0.5 g ofFe(acac)3 was dissolved in 10 mL of DPE or a mixture of DPE with the appropriate amount of surfactant.Next, 40 mL of DPE or a DPE-surfactant mixture was heated to required temperature on an oil bath withvigorous magnetic stirring in a two-necked round-bottomed flask equipped with a reflux condenser. Next, a solution of Fe(acac)3 was quickly added via a syringe into the hot DPE or DPE-surfactant solution. The resultant mixture was kept for 2 h with vigorous stirring for complete thermolysis and formation of nanosized particles. Then, the mixture was cooled and analyzed.

14024-18-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,14024-18-1 ,Iron(III) acetylacetonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Lyadov; Kochubeev; Koleva; Parenago; Khadzhiev; Russian Journal of Inorganic Chemistry; vol. 61; 11; (2016); p. 1387 – 1391; Zh. Neorg. Khim.; vol. 61; 11; (2016); p. 1440 – 1444,5;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

It is a common heterocyclic compound, the iron-catalyst compound, Acetylferrocene, cas is 1271-55-2 its synthesis route is as follows.

General procedure: To a stirred suspension of p-toluenesulfonyl hydrazide (1eq.) in water (12mL) and three drops of HCl 32%, the formyl or acetyl organometallic precursor (1eq.) was added. The resulting mixture was stirred for 18h at room temperature. The precipitate obtained was washed with water (2¡Á10mL) and dried under vacuum. The hydrazone derivatives were recrystallized from acetone/hexane (1:5) at -18C

1271-55-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1271-55-2 ,Acetylferrocene, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Concha, Camila; Quintana, Cristobal; Klahn, A. Hugo; Artigas, Vania; Fuentealba, Mauricio; Biot, Christophe; Halloum, Iman; Kremer, Laurent; Lopez, Rodrigo; Romanos, Javier; Huentupil, Yosselin; Arancibia, Rodrigo; Polyhedron; vol. 131; (2017); p. 40 – 45;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-42-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxylic acid, cas is 1271-42-7,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Will ferrocenecarboxylic acid (0.46g, 2mmol),N,N-Dicyclohexyl-carbodiimide (DCC, 0.453 g, 2.2 mmol)Add 1-hydroxybenzotriazole (HOBt, 0.337 g, 2.5 mmol) to a 100 mL round bottom flask and add 20 mLThe dried tetrahydrofuran was added and the mixture was stirred in an ice bath. 10 mL of a dry tetrahydrofuran solution containing DMAP (0.268 g, 2.2 mmol) was slowly added dropwise to the reaction system. After stirring in an ice bath for 30 minutes, the reaction was naturally warmed to room temperature. After the TLC detection reaction was completed, the reaction solution was concentrated under reduced pressure, and the residue was directly separated by column.(V petroleum ether: Ethyl acetate V, 5:1-2:1) Elution of the mobile phase yields 0.638 g of compound Fc-D1., Yield: 92%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1271-42-7, Ferrocenecarboxylic acid

Reference£º
Patent; Chinese Academy Of Sciences Fujian Structure Of Matter Institute; Yong Jianping; Lu Canzhong; (10 pag.)CN103319543; (2018); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Nanoparticles narrow diameter distribution were prepared by the high-temperature decompositionof Co(acac)2 and Fe(acac)3 with the 1:2 Mratio (0.6:1.2mmol) together with 1-2 octanediol, diphenyl ether (boiling point at 550 K)and oleic acid and oley-lamina as surfactants. The particle size was tailored by the sur-factant: precursor molar ratio ([Surf.]:[Prec.])according to there-ference [15]. The preparation was magnetically stirred and heated up to the boiling temperature T535 K for 120 min. After synthesis the nanoparticles were extracted by adding ethanol followed by centrifugation(14,000rpm/30min). After that,they were washed with acetone and centrifuged once again. The final sample consists in a black powder constituted by cobalt ferrite nanoparticles covered with an oleic acid layer, which is strongly linked to the surface, improving the chemical stability, and avoiding agglomeration. The samples were labeled S2,S5,and S7 with mean diameter 2.0,4.5,and 7.0 nm respectively, obtained from the TEM analysis.

The chemical industry reduces the impact on the environment during synthesis,14024-18-1,Iron(III) acetylacetonate,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Pianciola, Betiana N.; Lima, Enio; Troiani, Horacio E.; Nagamine, Luiz C.C.M.; Cohen; Zysler, Roberto D.; Journal of Magnetism and Magnetic Materials; vol. 377; (2015); p. 44 – 51;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Vinylferrocene, and cas is 1271-51-8, its synthesis route is as follows.

A solution of 4H-pyrane derivative (4, 7a and7b) (1 mmol), 4-(2-ferrocenylvinyl)benzaldehyde (2 mmol) andpiperidine (1 mL) in dry acetonitrile (10 mL) was refluxed for 1 hunder argon atmosphere. The reaction was controlled with TLCmethod by monitoring the 4-(2-ferrocenylvinyl) benzaldehyde inthe solution of reaction. After the completion of the reaction, thesolution was cooled to room temperature and the product waspurified using column chromatography over silica gel and hexane/EtOAC as eluent. Further purification was performed by recrystallizationfrom hexane and EtOAc to give corresponding compoundas a pure solid. Specific details for each compound are given belowand spectral data in each case is similar to reported one in above.2,6-Bis [4-(2-ferrocenylvinyl)styryl]-4H-pyran-4-one (6):from 0.1 g (0.32 mmol) 4-(2-Ferrocenylvinyl) benzaldehyde and0.02 g (0.11 mmol) 2, 6-Methyl-4H-pyran-4-one, 0.08 g (0.13 mmol)orange solid was obtained in 75percent yield.

1271-51-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1271-51-8 ,Vinylferrocene, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Teimuri-Mofrad, Reza; Rahimpour, Keshvar; Ghadari, Rahim; Journal of Organometallic Chemistry; vol. 846; (2017); p. 397 – 406;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion