Iron catalyst

102-54-5, Ferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1. Mix acetic anhydride and phosphoric acid and stir at room temperature for 15 minutes;2, adding ferrocene solids, heated to 40 C for 1 hour;3. Raise the temperature to 50 C and react until the ferrocene reaction is complete;4. Quickly pour the reaction solution into crushed ice, adjust the pH to 6-7 with sodium bicarbonate solids, and filter to obtain acetylBasic ferrocene crude;5. Pure acetyl ferrocene is obtained by recrystallization from petroleum ether.In this example, acetic anhydride: phosphoric acid: ferrocene solids = 3:1:0.5.By elemental analysis tests, the product was confirmed to be acetylferrocene. The yield is above 95%.The reaction conditions for the synthesis of acetylferrocene are mild, the temperature is easy to control, and the preparation yield is high.

102-54-5 Ferrocene 7611, airon-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Suzhou Tianyun Metal Materials Co., Ltd.; Wang Ming; (5 pag.)CN107488200; (2017); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12126-50-0, Bis(pentamethylcyclopentadienyl)iron(II) is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A premixture was prepared by dissolving (i) 0.76 g (4.09 mMoles) of decamethyl ferrocene and (ii) 0.48 g (4.09 mMoles) of isoamyl nitrite in 15 mL CHCI3. A reaction mixture was prepared by adding to said premixture a solution of (iii) 1.15 g (4.09 mMoles) Bis(trifluormethylsulfonyl)imide in 15 mL CHCI3 at room temperature under stirring. The color of the reaction mixture quickly turned from yellow-orange to dark green upon addition of the solution of (iii), and gas evolved. The reaction mixture was heated under reflux conditions up to its boiling point, and was kept at its boiling point under reflux conditions for one hour. Then the reaction mixture was allowed to cool and the liquid phase was removed by evaporation so that a solid residue was obtained. The obtained solid residue was digested using either diethyl ether or toluene as the digesting agent. The digesting agent was removed from the digested solid residue by filtration. The digested solid residue was collected and dried at 25 C for 6 hours in vacuo. The obtained product is a dark green powder. The amount of the obtained product was 1 .7 g, corresponding to a yield of 89.2 % based on the initial amount of decamethyl ferrocene. The chemical composition of the obtained product was analyzed by elemental analysis. The results are listed in the table below. For comparison, the theoretical weight percentage of each element in decamethyl ferrocenium bis(trifluoromethylsulfonyl)imide are given. The deviations between the calculated and the measured weight percentages are within the accuracy of measurement. element Calculated content/ Measured content

As the paragraph descriping shows that 12126-50-0 is playing an increasingly important role.

Reference£º
Patent; BASF SE; HEMGESBERG, Maximilian; FRANK, Juergen; NOeRENBERG, Ralf; (28 pag.)WO2017/97969; (2017); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-82-1, Aminoferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Aminoferrocene (0.40 g, 1.98 mmol) and acetaldehyde (0.1 mL, 1.98 mmol) were dissolved on methanol (10 mL) and refluxed for 2 h. Then, Na[B(CN)H3] (0.12 g, 1.98 mmol) dissolved in MeOH (10 mL) was slowly added. The mixture obtained was acidified with HCl (2 mL, 1 M in water) and left stirring for 30 min. Afterwards, the solvent was removed in vacuum (0.01 mbar) and the rest was mixed with triphosgene (0.59 g, 1.98 mmol) in toluene (25 mL). The suspension obtained was refluxed for 1 h, cooled down to 22C and then mixed with solution of 4-(hydroxymethyl)phenylboronic acid pinacol ester (0.46 g, 1.98 mmol) in toluene (10 mL). The resulting solution was heated to 120C and stirred at these conditions for 6 h. Then, the solvent was removed in vacuum (0.01 mbar) and the crude product was purified by column chromatography on silica gel using hexane containing 5% of acetone as eluent. Yield 0.20 g (20%). Rf= 0.5 (silica, eluent – hexane / acetone, 5/1, v/v). 1H NMR (400 MHz, acetone-d6), delta in ppm: 1.27 (t, 3H), 1.33 (s, 12H), 3.77 (q, 2H), 4.00 (s, 2H), 4.13 (s, 5H), 4.53 (m, 2H), 5.22 (s, 2H), 7.46 (d, 1 H), 7.77 (d, 2H). 13C NMR (100.55 MHz, acetone-d6), delta in ppm: 14.4, 25.3, 45.8, 62.8, 65.1, 66.9, 67.5, 69.8, 84.6, 127.8, 128.1, 135.7 (two overlapping peaks), 139.1, 141.2. FAB MS: calculated for C26H32BNO4Fe 489.2, found 489.2 m/z. C, H, N analysis: calculated for C26H32BNO4Fe – C 63.8%; H 6.6%; N 2.9%; found – C 63.8%; H 6.8%; N 2.9%. IR spectra (in KBr), wave number in cm-1: 3101, 2973, 1696, 1623.

As the paragraph descriping shows that 1273-82-1 is playing an increasingly important role.

Reference£º
Patent; Ruprecht-Karls-Universitaet Heidelberg; EP2497775; (2012); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1293-65-8, 1,1′-Dibromoferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A) Preparation of Intermediates; EXAMPLE A1; Preparation of (Rc,SFc,SP)-1-[2-(1-dimethylaminoethyl)ferrocen-1-yl]phenylphosphino-1′-bromoferrocene of the formula (A1) [Ph=phenyl; Me=methyl]; a) Preparation of 1-phenylchlorophosphino-1′-bromoferrocene (X1); 14.5 ml (23.2 mmol) of n-BuLi (1.6 M in hexane) are added dropwise to a solution of 8 g (23.2 mmol) of 1,1′-dibromoferrocene in 30 ml of THF at a temperature of <-30 C. The mixture is stirred for another 30 minutes at this temperature. It is then cooled to -78 C. and 3.15 ml (23.2 mmol) of phenyldichlorophosphine are added dropwise at such a rate that the temperature does not exceed -60 C. After stirring at -78 C. for a further 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another one hour. This gives a suspension of the monochlorophosphine X1.; b) Preparation of 1-bromo-1'-lithioferrocene X5; 4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.43 g (10 mmol) of 1,1'-dibromoferrocene in 10 ml of tetrahydrofuran (THF) at a temperature of <-30 C. The mixture is stirred at this temperature for another 1.5 hours and subsequently cooled to -78 C. This gives a suspension of 1-bromo-1'-lithioferrocene X5.; Reaction mixture b): In a second reaction flask, 4.0 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.43 g (10 mmol) of 1,1'-dibromo-ferrocene in 10 ml of THF which has cooled to -30 C. at such a rate that the temperature does not exceed -30 C. The mixture is subsequently stirred at -30 C. for a further 1.5 hours and the mixture containing the 1-bromo-1'-lithioferrocene is finally cooled to -78 C. The synthetic route of 1293-65-8 has been constantly updated, and we look forward to future research findings. Reference£º
Patent; Chen, Weiping; Spindler, Felix; Nettekoven, Ulrike; Pugin, Benoit; US2010/160660; (2010); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.12093-10-6,Ferrocenecarboxaldehyde,as a common compound, the synthetic route is as follows.

To a solution of ferrocenecarboxaldehyde (2) (4.28 g, 20 mmol) in acetone (100 mL) was added 2 N aq. NaOH (2 mL). The mixture was stirred at room temperature. After complete reaction (TLC analysis), the mixture was diluted with water and the precipitation was filtered to afford the crude product, which were purified by column chromatography using silica gel. 84% yield; brown solid, mp 125-127 C; 1H NMR (600 MHz, CDCl3): delta 7.42 (d, J = 16.0 Hz, 1H, CH=CH), 6.34 (d, J = 16.0 Hz, 1H, CH=CH), 4.50 (s, 2H, ferrocene-H), 4.44 (s, 2H, ferrocene-H), 4.15 (s, 5H, ferrocene-H), 2.29 (s, 3H, Me-H). MS (ESI): 255.1 (C14H14FeO, [M+H]+). Anal. Calcd for C14H14FeO: C, 66.17; H, 5.55; O, 6.30. Found: C, 66.23; H, 5.49; O, 6.36%.

The synthetic route of 12093-10-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Guo, Ying; Wang, Si-Qi; Ding, Zong-Qing; Zhou, Jia; Ruan, Ban-Feng; Journal of Organometallic Chemistry; vol. 851; (2017); p. 150 – 159;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, Ferrocenecarboxaldehyde is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a typical procedure, 1.39 mmol of 2?-hydroxyacetophenone (for 1 and 3) or 2?-hydroxy-4?-methoxyacetophenone (for 2 and 4) were dissolved in 40 ml of methanol. To this solution, 4 equivalent of potassium hydroxide were added and stirred for 15 min at room temperature. Then, 1.40 mmol of the appropriate ferrocenecarboxaldehyde derivative, (i.e. 1-ferrocenecarboxaldehyde for 1 and 2 or 1,1-ferrocenedicarboxaldehyde for 3 and 4) were added. The mixture was stirred during three days at room temperature. Then, methanol was evaporated in vacuum (rotary evaporator) and the crude reaction mixture was submitted to column chromatography (silica gel 60, Ethyl acetate: Hexane = 3:10 v/v). (E)-3-Ferrocenyl-1-(2-hydroxyphenyl)-prop-2-en-1-one, (1). Yield 65% (605 mg), mp. 157-159.4 C. IR (KBr) cm-1: 3456 (OH), 3105 (C-H), 3086 (C-H), 1630 (C=O). 1H NMR (CDCl3, 400 MHz): delta 4.22 (5H, s, C5H5), 4.56 (2H, s, H-beta-C5H4), 4.65 (2H, s, H-alpha -C5H4), 6.95 (1H, t, J = 7.2 Hz, Harom), 7.26 (1H, d, J = 15 Hz, =CH), 7.45 (1H, t, J = 7.2 Hz, Harom), 7.88 (1H, d, J = 9.1 Hz, Harom), 7.92 (1H, d, J = 15 Hz, =CH), 13.08 (1H, s, OH). 13C NMR (CDCl3, 400 MHz): delta: 31.34, 69.51, 69.71, 70.36, 72.27, 117.15, 119.00, 119.10, 129.79, 136.30, 148.36, 164.03, 193.17. Uv-vis: 528 nm (704.5 cm-1M-1), 340 nm (8400 cm-1M-1). Analysis calculated for C19H16O2Fe: C, 68.70; H, 4.86. Found: C, 68.22; H, 4.76.

The synthetic route of 12093-10-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Trujillo, Alexander; Ocayo, Fernanda; Artigas, Vania; Santos, Juan C.; Jara-Ulloa, Paola; Kahlal, Samia; Saillard, Jean-Yves; Fuentealba, Mauricio; Escobar, Carlos A.; Tetrahedron Letters; vol. 58; 5; (2017); p. 437 – 441;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1287-16-7, Ferrocenylacetic acid is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1) 1.1 mmol of ferrocenyl acetic acid and 1 mmol of 3-phenoxymethylene-4-amino-5-mercapto-1,2,4-triazole were weighed out,Added to a dry 250mL single-necked flask,Then p-toluenesulfonic acid 0.13 mmol,Then 6 mL of DMF was added thereto,The glass rod is stirred to dissolve it.2)The round bottom flask was placed in a microwave reactor,380W under irradiation once every 30s,Irradiation duration of 5min.After irradiation,cool down.3)Pour it into a crushed beaker,With potassium carbonate and potassium hydroxide pH = 7,Placed overnight,filter,Washed,dry,The crude product of 3-phenoxymethylene-6-ferrocenylmethylene-1,2,4-triazolo [3.4-b] -1,3,4-thiadiazole was obtained,The crude product was recrystallized using 80% aqueous ethanol,That is, a brown solid,The yield was 84%

1287-16-7 Ferrocenylacetic acid 73425372, airon-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Shaanxi University of Science and Technology; Liu, Yuting; Song, Simeng; Yin, Dawei; Jiang, Shanshan; Liu, Beibei; Yang, Aning; Wang, Jinyu; Lyu, Bo; (13 pag.)CN104231004; (2017); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1287-16-7, Ferrocenylacetic acid is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1) 1.1 mmol of ferrocenyl acetic acid and 1 mmol of 3- (2,4-dichlorophenoxymethylene) -4-amino-5-mercapto-1,2,4-triazole were weighed out,Added to a dry 250mL single-necked flask,Then p-toluenesulfonic acid 0.12 mmol,Then 5 mL of DMF was added thereto,The glass rod is stirred to dissolve it.2)The round bottom flask was placed in a microwave reactor,360W under irradiation once every 30s,Irradiation duration of 4min.After irradiation,cool down.3)Pour it into a crushed beaker,With potassium carbonate and potassium hydroxide pH = 7,Placed overnight,filter,Washed,dry,3- (2,4-dichlorophenoxymethylene) -6-ferrocenylmethylene-1,2,4-triazolo [3.4-b] -1,3,4-thiadiazine Azole crude product,The crude product was recrystallized using 80% aqueous ethanol,That is, a brown solid,The yield is 81%

The synthetic route of 1287-16-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shaanxi University of Science and Technology; Liu, Yuting; Song, Simeng; Yin, Dawei; Jiang, Shanshan; Liu, Beibei; Yang, Aning; Wang, Jinyu; Lyu, Bo; (13 pag.)CN104231004; (2017); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1277-49-2, (1-Hydroxyethyl)ferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under an inert atmosphere, to a solution of alcohol 3 (2.00 g, 8.69mmol) and DMAP (53.1 mg, 0.43 mmol) in anhydrous CH 2 Cl 2 (20 mL)was added dropwise Et 3 N (3.64 mL, 26.1 mmol) at 0 C, followed byaddition of methanesulfonyl chloride (0.45 mL, 9.14 mmol). The reac-tion mixture was then stirred at r.t. for 4 h. The reaction wasquenched by addition of 5% solution of NaHCO 3 (40 mL), and the mix-ture was extracted with CHCl 3 (3 ¡Á 100 mL). Collected organic layerswere washed with brine (100 mL), dried over Na 2 SO 4 , filtrated, andsolvent was removed under reduced pressure to afford the crudeproduct. The crude product was purified by chromatography on Al 2 O 3(hexanes/EtOAc, 9:1; R f = 0.8) to afford target product 4.Yield: 1.59 g (86%); yellow-orange solid; mp 50-52 C (lit. 15 51-52 C).IR (ATR): 1623, 1408, 1103, 1045, 998, 894, 810, 726, 517, 477, 446cm -1 .1 H NMR (600 MHz, CDCl 3 ): delta = 6.46 (dd, J = 17.4, 10.7 Hz, 1 H), 5.34 (d,J = 17.5 Hz, 1 H), 5.03 (d, J = 10.7 Hz, 1 H), 4.36 (s, 2 H), 4.21 (s, 2 H),4.11 (s, 5 H).13 C NMR (151 MHz, CDCl 3 ): delta = 134.7, 111.1, 83.7, 69.3, 68.7, 66.8.HRMS (ESI): m/z calcd for [M + H + ] C 12 H 13 Fe + : 213.0367; found:213.0359.Obtained spectral data are in agreement with those of the commer-cially available product.

The synthetic route of 1277-49-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Plevova, Kristina; Mudrakova, Brigita; ?ebesta, Radovan; Synthesis; vol. 50; 4; (2018); p. 760 – 763;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

102-54-5, Ferrocene is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The mixture of ferrocene (2.79 g, 15 mmol), DMF (2.19 g, 30 mmol) and chloroform (11 mL) was stirred at 0 C under N2 atmosphere. Phosphorus oxychloroide (4.59 g, 30 mmol) was added slowly over a period of 30 min at 0 C and stirred at the temperature range of 55-60 C for 24 h until the reaction was completed. The mixture was poured into ice-water (100 mL) and neutralized with 5% aqueous Na2CO3 accompanying the precipitate formation. The precipitate was filtered off and the filtrate was extracted with 100 mL of toluene. Then the organic phase was washed three times with water, dried over anhydrous magnesium sulfate, filtered and the filtrate was concentrated under reduced pressure to give a crude product. The crude product was purified by column chromatography on silica gel to give compound 8a as a crimson solid (75.7%).

102-54-5 Ferrocene 7611, airon-catalyst compound, is more and more widely used in various.

Reference£º
Article; Chen, Peiqi; Liu, Chunjuan; Hu, Jianfeng; Zhang, Hao; Sun, Ranfeng; Journal of Organometallic Chemistry; vol. 854; (2018); p. 113 – 121;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion