Tag: M.W:300-400

It is a common heterocyclic compound, the iron-catalyst compound, 1,1′-Dibromoferrocene, cas is 1293-65-8 its synthesis route is as follows.

1 ,1 ‘-Dibromoferrocene (0.67 g, 1.97 mmol) in anhydrous tetrahydrofuran (THF) (30 ml) was placed in a reaction vessel and cooled to -78 0C using a dry ice and acetone mixture, n-butyl lithium (0.94 ml, 2.36 mmol) was added under inert conditions thereto and the contents of the reaction vessel kept stirred for approximately 1 hour while cold zinc chloride (2.16 ml, 2.16 mmol) was added. Tetrakis(triphenylphosphine)palladiumO (50 mg) and 4,5- dichlorophthalonitrile (0.5 g, 1.97 mmol) were then added. The contents of the reaction vessel were allowed to warm to room temperature and were kept stirred for approximately 2 hours before heating to approximately 90 0C for 12 hours. Thereafter, water (20 ml) was added and extracted with dichloromethane (3 x 20 ml). The combined organic layers were dried over magnesium sulfate and reduced to dryness under reduced pressure to obtain a crude product. The crude product was placed on alumina and eluted with diethyl ether ; petroleum spirit (55:45) to yield red crystals.

1293-65-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1293-65-8 ,1,1′-Dibromoferrocene, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; CORUS UK LIMITED; HOLLIMAN, Peter; RUGEN-HANKEY, Sarah; WO2010/136178; (2010); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1293-65-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,1′-Dibromoferrocene, cas is 1293-65-8,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

1,10-Dibromoferrocene [23] (1.8 g, 5.2 mmol) was dried for 3 h at2 * 102 mbar. Subsequently it was dissolved in dry tetrahydrofuran(20 ml) and cooled to 78 C, causing a clear orange solution. Nbutyllithiumin n-hexane (3.7 ml, 5.6 mmol, 1.6 M) was addedslowly over 15 min. The resulting suspension was stirred for anadditional 30 min. In a second Schlenk flask, a suspension of NFSI(1.81 g, 5.8 mmol, dried for 3 h in vacuo) in diethylether (20 ml) wasprepared. After 30 min the reaction mixture was transferred intothe NFSI solution via cannula. Directly after the addition the solutionwasquenched with NaBH4 and 50 ml of 0.1MCa(OH)2, and theresulting slurry was diluted with hexane (100 ml). The two phasesystem was stirred for 1 h, the organic phase was separated andwashed three times with water. After evaporation of the solvent invacuo, the resulting brown oil was dissolved again in 50 ml ofhexane and the organic phasewas extracted thrice with 0.2MFeCl3solution and subsequently 3 times with water. The organic phasewas filtered through alumina (Activity III, diameter 2 cm, length25 cm) and dried with MgSO4. After the solvents were evaporatedthe crude product was purified by HPLC (isocratic CH3CN/H2O(70:30); isocratic). The HPLC fractions were extracted with hexane(4 20 ml). The organic phase was dried with MgSO4 and evaporatedin vacuo, leaving the product as a browneorange oil.HPLC: CH3CN/H2O (70:30; isocratic). Browneorange oil (674 mg,2.40 mmol, 46%);1H NMR (CDCl3): delta 4.51 (app. s, 2H, CpH, H2?,5?), 4.33 (app. s, 2H,CpH,H2,5), 4.21 (app. s, 2H, CpH,H3?,4?), 3.88 (app. s, 2H, CpH,H3,4). 13CNMR (CDCl3): delta 135.6 (d, 1JCF 270 Hz, C1), 78.1 (s, C1?), 71.6 (s, C2?,5?),68.6 (s, C3?,4?), 64.0 (d, 3JCF 3.8 Hz, C3,4), 58.7 (d, 2JCF 15.0 Hz, C2,5).19F{1H} NMR (CDCl3): delta 189 (s). IR (ATR): cm-1 3110 (w), 1471 n(CCaromatic,vs); 1242 n(CeF, m),1152 (m), 807 (vs), 657 (m).MS(EI): m/z282 [M], 128 [Cp2]; calcd for C10H8FBrFe 282. Anal. Calcd forC10H8FBrFe: C, 42.45; H, 2.85. Found: C, 42.26; H, 2.86.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,1′-Dibromoferrocene, 1293-65-8

Reference£º
Article; Bulfield, David; Maschke, Marcus; Lieb, Max; Metzler-Nolte, Nils; Journal of Organometallic Chemistry; vol. 797; (2015); p. 125 – 130;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Fe(acac)3 (706 mg, 2 mmol), 1,2-dodecanediol (2.023 g,10 mmol), oleic acid (1.695 g, 6 mmol), oleylamine (1.605 g,6 mmol), and diphenyl ether (20 mL) were mixed and magnetically stirred under a flow of argon. The mixture was heated to 200Cfor 30 min and then heated to 280C for another 30 min. Theblack-brown mixture was cooled to room temperature under argon atmosphere. A black material was precipitated with ethanoland separated via centrifugation. The black product was dissolvedin hexane, precipitated with ethanol, centrifuged to remove the solvent, and dispersed into hexane. Fe3O4nanoparticles wereobtained after evaporation of hexane at room temperature (yield:31%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Iron(III) acetylacetonate, 14024-18-1

Reference£º
Article; Yuan, Weizhong; Shen, Jin; Li, Lulin; Liu, Xu; Zou, Hui; Carbohydrate Polymers; vol. 113; (2014); p. 353 – 361;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1293-65-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,1′-Dibromoferrocene, cas is 1293-65-8,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 1,1?-dibromo ferrocene (1, 2.58 g, 7.50 mmol, 1.0 equiv) dissolved in tetrahydrofuran (40 mL) a 2.5 M solution of n-butyl lithium in hexane (2.85 mL, 7.13 mmol, 0.95 equiv) was added dropwise at-70 C. After stirring the reaction solution at this temperature for 1 h, chlorodi-2-(5-methyl)furyl phosphine (2c) (1.71 g, 7.50 mmol) was added in a single portion. The reaction mixture was stirred for 1 h at ambient temperature and was then concentrated in oil pump vacuum. The resulting residue was purified by column chromatography on alumina using a mixture of hexane-diethyl ether (ratio 5:1; v/v). After drying in oil pump vacuum the title compound was obtained as a pale yellow solid. Please, note that 3c could not be completely separated from P(Fc)(2-(5-Me)C4H2O)2 formed as by-product and hence was used without additional purification in further reactions. Anal. Calcd. for C20H18BrFeO2P (457.08 g/mol): C, 52.55; H, 3.97. Found: C, 54.22*; H 3.92*. Mp.: 77 C. IR (NaCl, /cm-1): 1019 (s, C-O-C), 1410/1446/1496/1593 (w, C=C), 2920/2951 (w, C-H), 3109 (w, =C-H). 1H NMR (500.30MHz, CDCl3, delta): 2.36 (s, 6H, CH3), 3.99 (pt, 3/4JHH=1.9Hz, 2H, Hbeta/C5H4Br), 4.31 (pt, 3/4JHH=1.9Hz, 2H, Halpha/C5H4Br), 4.38 (dpt, 4JPH=0.6Hz, 3/4JHH=2.0Hz, 2H, Hbeta/C5H4P), 4.47 (dpt, 3JPH=1.8Hz, 3/4JHH=2.0Hz, 2H, Halpha/C5H4P), 5.99 (ddq, 4JPH=1.4Hz, 3JHH=3.1Hz, 4JHH=1.0Hz, 2H, H4/5-MeC4H2O), 6.59 (ddq, 3JPH=1.9Hz, 3JHH=3.1Hz, 5JHH=0.2Hz, 2H, H3/5-MeC4H2O). 13C{1H} NMR (125.81MHz, CDCl3, delta): 14.1 (s, CH3), 68.5 (s, Cbeta/C5H4Br), 71.2 (s, Calpha/C5H4Br), 74.0 (d, 3JCP=5Hz, Cbeta/C5H4P), 75.5 (d, 1JCP=3Hz, Ci/C5H4P), 75.8 (d, 2JCP=18Hz, Calpha/C5H4P), 77.9 (s, Ci/C5H4Br), 107.0 (d, 3JCP=6Hz, C4/5-MeC4H2O), 121.1 (d, 2JCP=22Hz, C3/5-MeC4H2O), 150.2 (d, 1JCP=4Hz, C2/5-MeC4H2O), 156.7 (d, 3JCP=3Hz, C5/5-MeC4H2O). 31P{1H} NMR (202.5MHz, CDCl3, delta):-66.7 (s). *) The sample included 15% 1-di(2-(5-methylfuryl)phosphanyl)ferrocene (4b) which could not be separated from the title compound

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1293-65-8, 1,1′-Dibromoferrocene

Reference£º
Article; Schreiner, Claus; Jeschke, Janine; Milde, Bianca; Schaarschmidt, Dieter; Lang, Heinrich; Journal of Organometallic Chemistry; vol. 785; (2015); p. 32 – 43;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, Iron(III) acetylacetonate is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Fe3O4 nanoparticles were prepared by the following synthetic procedure, which was based on our previous study [29]: the reaction was carried out in the 100 mL three-necked round-bottom flask equipped with a condenser and a thermometer. The heating was carried out by a heating mantle. Iron acetylacetonate (III) (1 mmol) and 1,2-hexadecanediol (3.0 mmol) as Fe3+ reducing agent were added into a mixture of oleic acid (15 mmol) and distilled oleylamine (15 mmol). The solution was maintained at 130 C for 30 min with vigorous stirring under a reduced atmosphere (ca. 200 Pa) for dissolution and removal of impurities such as water molecules and organic molecules with low boiling temperatures. In this phase, the solution color was dark brown. Then, the solution was heated to reaction temperatures of 200 C, 250 C, 280 C, and 300 C for 1 h, 3 h, and 6 h under a nitrogen atmosphere (1 atm.). The solution color changed to black. Finally, the solution was left to cool to room temperature by remove of the heat source. When the solution becomes hard or loses fluidity after cooling to room temperature, the resulting solidified solution was dissolved by adding 10 mL n-hexane before the following precipitation process. The iron oxide nanoparticles were precipitated by the addition of ethanol (70~80 mL) and were subsequently subjected to centrifugation (3000 g, 10 min).The precipitated nanoparticles were redispersed into n-hexane., 14024-18-1

14024-18-1 Iron(III) acetylacetonate 91759530, airon-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Nakaya, Masafumi; Nishida, Ryo; Muramatsu, Atsushi; Molecules; vol. 19; 8; (2014); p. 11395 – 11403;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Iron(III) acetylacetonate, and cas is 14024-18-1, its synthesis route is as follows.,14024-18-1

Fe3O4 NPs were synthesized by thermal decomposition of Fe(acac)3 in the presence of OAm and BE according to the literature [14]. In a typical synthesis, 3 mmol of Fe(acac)3 was dissolved in 15 mL of BE and 15 mL of OAm. The solution was dehydrated at 110C for 1 h under N2 atmosphere, then quickly heated to 300C at a heating rate of 20C/min, and aged at this temperature for 1 h. After the reaction,the solution was allowed to cool down to room temperature. The Fe3O4 NPs were extracted upon the addition of 50 mL of ethanol, followed by centrifuging at 8500 rpm for 10 min. The Fe3O4 NPs were dispersed in nonpolar solvents such as hexane and chloroform.

With the complex challenges of chemical substances, we look forward to future research findings about 14024-18-1,belong iron-catalyst compound

Reference£º
Article; Metin, Oender; Aydo?an, ?akir; Meral, Kadem; Journal of Alloys and Compounds; vol. 585; (2014); p. 681 – 688;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14024-18-1,Iron(III) acetylacetonate,as a common compound, the synthetic route is as follows.

To prepare nanosized iron(III) oxide, 0.5 g ofFe(acac)3 was dissolved in 10 mL of DPE or a mixture of DPE with the appropriate amount of surfactant.Next, 40 mL of DPE or a DPE-surfactant mixture was heated to required temperature on an oil bath withvigorous magnetic stirring in a two-necked round-bottomed flask equipped with a reflux condenser. Next, a solution of Fe(acac)3 was quickly added via a syringe into the hot DPE or DPE-surfactant solution. The resultant mixture was kept for 2 h with vigorous stirring for complete thermolysis and formation of nanosized particles. Then, the mixture was cooled and analyzed.

14024-18-1, As the paragraph descriping shows that 14024-18-1 is playing an increasingly important role.

Reference£º
Article; Lyadov; Kochubeev; Koleva; Parenago; Khadzhiev; Russian Journal of Inorganic Chemistry; vol. 61; 11; (2016); p. 1387 – 1391; Zh. Neorg. Khim.; vol. 61; 11; (2016); p. 1440 – 1444,5;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, Iron(III) acetylacetonate is a iron-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

177 mg of Fe (acac) 3 (0.5 mmol) Is dissolved in diphenyl ether 0.56 mL of oleic acid (1.5 mmol), 0.64 mL of oleylamine (1.5 mmol) And 646 mg of 1,2-hexadecane diol (2.5 mmol) At 260 C for 1 hour 30 minutes Min in a nitrogen atmosphere. The gold-coated nanoparticles of the iron oxide core nanoparticles prepared by the above reaction were subjected to the following procedure Respectively. To 10 mL of iron oxide nanoparticle solution, 0.3 g Of gold acetate, 0.1 mL of oleic acid (0.3 mmol), 0.45 ML of oleylamine (1.1 mmol) and 800 mg of 1,2-hexadecane diol (3.1 mmol) was added 180 degrees to 1 hour 30 Min in a nitrogen atmosphere. After the temperature was dropped to room temperature, ethanol was added to precipitate And centrifuged at 7,000 rpm for 10 minutes.

14024-18-1, As the paragraph descriping shows that 14024-18-1 is playing an increasingly important role.

Reference£º
Patent; Korea Atomic Energy Research Institute; Park, Jung Chan; Jung, Myung Hwan; (9 pag.)KR2016/82202; (2016); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14024-18-1,Iron(III) acetylacetonate,as a common compound, the synthetic route is as follows.

A typical procedure for preparation of oil-soluble magnetite nanoparticles is briefly described as follows: first, 20 mL of diethylene glycol, 0.70 g (2 mmol) of iron (III) acetylacetonate, and 1.06 mL (3 mmol) of oleic acid were mixed in a 50 mL Teflon-lined stainless autoclave while magnetically stirring. Then, the autoclave was put into oven, kept at 180C for 5 h. After cooled to room temperature naturally, 40 mL ethanol was added to yield a black precipitate. The black Fe3O4 precipitate was separated by centrifuging at 10,000 rpm for 20 min, and re-dispersed in 10 mL of hexane or dried at 60C under vacuum for 24 h. (The as-prepared product was donated as SO1.) The as-synthesized Fe3O4 colloid in hexane is hydrophobic and stable for nearly a year, while the dried Fe3O4 sample can be stable for several months. The synthesis of water-soluble magnetite nanoparticles was carried out only by reacting an iron precursor, iron (III) acetylacetonate (Fe(acac)3), in the polyol medium (diethylene glycol) without oleic acid under the same reaction conditions. After cooling down to room temperature, 40 mL of ethyl acetate was added to the reaction solution resulted in a black precipitation of magnetite nanoparticles which was then separated from the solution by centrifuging at 10,000 rpm for 20 min. After washed with ethyl acetate for three times, the precipitation was re-dispersed in polar solvents such as ethanol and water for further investigation. The Fe3O4 solid productions could also be obtained by drying the precipitation at 60C under vacuum for 24 h. (The as-prepared product was donated as SW1.)

14024-18-1, The synthetic route of 14024-18-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Chen, Fenghua; Zhao, Taonan; Chen, Qingtao; Han, Lifeng; Fang, Shaoming; Chen, Zhijun; Materials Research Bulletin; vol. 48; 10; (2013); p. 4093 – 4099;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is Iron(III) acetylacetonate, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 14024-18-1, its synthesis route is as follows.,14024-18-1

Fe3O4 nanoparticles were prepared by the following synthetic procedure, which was based on our previous study [29]: the reaction was carried out in the 100 mL three-necked round-bottom flask equipped with a condenser and a thermometer. The heating was carried out by a heating mantle. Iron acetylacetonate (III) (1 mmol) and 1,2-hexadecanediol (3.0 mmol) as Fe3+ reducing agent were added into a mixture of oleic acid (15 mmol) and distilled oleylamine (15 mmol). The solution was maintained at 130 C for 30 min with vigorous stirring under a reduced atmosphere (ca. 200 Pa) for dissolution and removal of impurities such as water molecules and organic molecules with low boiling temperatures. In this phase, the solution color was dark brown. Then, the solution was heated to reaction temperatures of 200 C, 250 C, 280 C, and 300 C for 1 h, 3 h, and 6 h under a nitrogen atmosphere (1 atm.). The solution color changed to black. Finally, the solution was left to cool to room temperature by remove of the heat source. When the solution becomes hard or loses fluidity after cooling to room temperature, the resulting solidified solution was dissolved by adding 10 mL n-hexane before the following precipitation process. The iron oxide nanoparticles were precipitated by the addition of ethanol (70~80 mL) and were subsequently subjected to centrifugation (3000 g, 10 min).The precipitated nanoparticles were redispersed into n-hexane.

With the complex challenges of chemical substances, we look forward to future research findings about Iron(III) acetylacetonate

Reference£º
Article; Nakaya, Masafumi; Nishida, Ryo; Muramatsu, Atsushi; Molecules; vol. 19; 8; (2014); p. 11395 – 11403;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion